Laminating machine with hot air for PE sheets
Developed and manufactured by SUTEAU-ANVER, this machine has been designed for heat bonding two sheets of PE (fusion of one side of each sheet). Other materials on request.
The entrance and the ejection of the sheets can be either manually or automatically.
Technical datas of PE sheets :
| Width mini | 400 mm |
| Width maxi | 1 500 mm |
| Length mini | 600 mm |
| Length maxi | 2 600 mm |
| Thickness mini in entrance | 10 mm |
| Thickness maxi in entrance | 290 mm |
| Thickness mini in exit | 20 mm |
| Thickness maxi in exit | 300 mm |
Technical features
Tubular paint frame on adjustable feet.
Lower plate in entrance in punched sheet metal. The corner of this plate will be adjustable manually to vary the entrance corner of the sheet from 0 to -10°. It will be equiped with 2 lateral guides adjustable manually to adapt at the various width of sheets.
Upper plate in entrance in punched sheet metal. The height of this plate will be adjustable to adapt at the various thickness of the sheets. It will be equiped with 2 lateral guides adjustable manually to adapt at the various width of sheets.
An heating nozzle fixed at the extremity of the upper plate (in entrance of the calender) will allow to melt the material before cement. In exit, the temperature of the nozzle (adjustable on the control panel from 50 to 250°C)
Manual adjustment of the nozzle in height.
Laminating machine is composed of 8 motorised rollers (4 in upper part and 4 in lower part) by a motoreductor. The speed will be adjustable by a potentiometer through the control panel from 3 to 15 m/mn. The opening between the lower and the upper rollers will be adjustable manually (fixed lower roller and adjusstable upper roller).
Collect table in exit lenght 2,5 m
| Advance speed : | adjustable from 1 to 10 m/mn |
| Temperature in nozzle exit : | adjustable from 50 to 250°C – other temperature on request |
| Thickness laminating : | adjustable from 20 to 300 mm |
| Height upper entrance plate : | manual adjustment |
| Corner of upper entrance plate : | manual adjustment from 15° to 20° |
| Corner of lower entrance plate : | manual adjustment from 0° to –10° |
| Electrical energy : | 400 Volts three phase + Neutral + Earth 50hz |
| Pneumatic energy : | Dry air 6 Bars |
Options
- Adhesive unwinder with brake
- Automatic sheet feeding system
- Work with rolls
- Longitudinal cut
- Cross cutting
- Rewinder
- Sheet stacker